RR-90 Remote Shutter Release
Model Number: RR-90
Compatible Brand: Fujitsu
Approx Size: 150 x 38 x15mm
Content: Timer Remote shutter
Features and Specifications:
This digital timer remote is designed to trigger a camera shutter with regular time intervals, featuring self-timer, interval timer, long-exposure timer, and exposure-count settings.
The timer can be set anywhere from 1 second to 99 hours, 59 minutes, 59 seconds. The buttons can be operated with a single thumb. The LCD panel can also be illuminated. The remote has a stylish and ergonomic design, making it a pleasure to use. It has a super large LCD screen. The shutter release button on the remote is a two-stage button: half-pressing the button will cause the camera to focus, and full-pressing will trigger the camera's shutter.
Compatible with: FUJIFILM X-M1 ,X-A1,X-Q1,X-E2,X-T1
Full functions supported as the camera shutter switch (with halfway or complete pressing)
Functions as a timer remote and can be programmed to function as an interval met
Design for group, macro, long exposures, continuous, motion shooting, etc.
Energy saving design, can be use for long time
Timer delay: 0s to 99hrs 59min 59s in 1s increments
Exposure time: 0s to 99hrs 59min 59s in 1s increments
Interval: 0s to 99hrs 59min 59s in 1s increments
Delay / Self Timer (DELAY)
Just like the self timer on your camera. The TM timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 59 minutes and 59 seconds.
It allows you to take time exposures up to 100 hours in length.
Interval Timer (INTVL)
The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
Exposure Count (N)
This setting permits you to set the number of exposures that will be taken, up to a total 399.