DJI Zenmuse L3 (EU) SP Plus
      DJI Zenmuse L3 (EU) SP Plus
      DJI Zenmuse L3 (EU) SP Plus

      DJI Zenmuse L3 (EU) SP Plus

      €13,600.00
      Tax Included
      Contact us for ordering

      DJI Zenmuse L3 (EU) SP Plus adds a specialist LiDAR capture payload to compatible DJI enterprise drones, supporting aerial surveying and mapping workflows.

      Quantity :

      Specifications

      Key Features
      1535 nm long-range LiDAR
      Dual 100 MP RGB mapping cameras
      4/3 CMOS sensors
      Up to 2000 m LiDAR detection range
      Up to 16 LiDAR returns
      High-precision POS system
      3-axis stabilized gimbal
      107° combined horizontal FOV
      Up to 100 km² daily coverage
      Class 1 laser
      IP54 protection

      Compatibility
      DJI Matrice 400
      Requires DJI Zenmuse L3 Single Gimbal Connector

      LiDAR
      Laser Wavelength: 1535 nm
      Laser Beam Divergence: 0.25 mrad
      Detection Range: 700 m @ 10% reflectivity, 350 kHz
      Detection Range: 950 m @ 10% reflectivity, 100 kHz
      Maximum Detection Range: 2000 m @ 80% reflectivity, 100 kHz
      Minimum Effective Detection Distance: 10 m
      Ranging Accuracy: ±10 mm
      Repeatability: <5 mm
      Maximum Pulse Frequency: 2,000 kHz
      Number of Returns: Up to 16
      Laser Classification: Class 1

      Scanning
      Linear Scanning FOV: 80° horizontal × 3° vertical
      Star-Shaped Scanning FOV: 80° × 80°
      Non-Repetitive Scanning FOV: 80° × 80°
      Cross-Cycle Calculation: 7 times

      RGB Mapping Cameras
      Sensor: 4/3 CMOS
      Resolution: 100 MP / 25 MP
      Photo Resolution: 12288 × 8192 / 6144 × 4096
      Equivalent Focal Length: 28 mm
      Horizontal FOV: 62° per camera
      Combined Horizontal FOV: 107°
      Aperture: f/2.0–f/11
      Mechanical Shutter: 2–1/1500 s / 2–1/2000 s
      Electronic Shutter: 2–1/16000 s
      Video: 4K at 30 fps / FHD at 30 fps
      Video Format: MP4, H.265

      Point Cloud Accuracy
      Vertical Accuracy at 120 m: 3 cm RMSE
      Horizontal Accuracy at 120 m: 4 cm RMSE
      Vertical Accuracy at 300 m: 5 cm RMSE
      Horizontal Accuracy at 300 m: 7.5 cm RMSE
      Point Cloud Thickness at 120 m: 1.2 cm @ 1σ
      Point Cloud Thickness at 300 m: 2 cm @ 1σ
      RGB GSD at 300 m: 3 cm

      Position & Orientation
      GNSS Update Rate: 5 Hz
      POS Update Rate: 200 Hz
      Yaw Accuracy: 0.02°
      Pitch/Roll Accuracy: 0.01°
      RTK Horizontal Accuracy: 1.0 cm + 1 ppm
      RTK Vertical Accuracy: 1.5 cm + 1 ppm

      Gimbal
      3-axis stabilization
      Angular Accuracy: ±0.01°
      Mechanical Pitch Range: -135° to +73°
      Mechanical Roll Range: -90° to +60°
      Mechanical Yaw Range: -105° to +105°
      Controllable Pitch Range: -120° to +60°
      Controllable Yaw Range: -80° to +80°

      Physical
      Dimensions: 192 × 162 × 202 mm
      Weight: 1.60 kg without single gimbal connector
      Single Gimbal Connector Weight: 145 g
      Power: 64 W typical / 100 W maximum
      Protection Rating: IP54
      Operating Temperature: -20°C to 50°C
      Storage Temperature: -40°C to 70°C

      Data & Software
      Data Collection: DJI Pilot 2
      Data Processing: DJI Terra
      Data Application: DJI Modify
      Cloud Platform: DJI FlightHub 2
      Storage: CFexpress Type B
      Supported Point Cloud Formats: PNTS, LAS, LAZ, PLY, PCD, S3MB

      DJI
      CB.202510103616

      Specific References

      EAN13
      6937224133778

      4 other products in the same category:

      DJI Zenmuse L3 (EU) SP Plus | Zgatar Kosova

      DJI Zenmuse L3 (EU) SP Plus

      €13,600.00
      Tax Included